×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

  • Technical science. Informatics, computer facilities and management

  • A fuzzy comparison method for managing the functioning of an organizational system

    Modern digitalization processes involve the use of intelligent systems at key stages of information processing. Given that the data available for intelligent analysis in organizational systems are often fuzzy, there is a problem of comparing the corresponding units of information with each other. There are several known methods for such a comparison. In particular, for random fuzzy variables with known distribution laws, the degree of coincidence of these distribution laws can be used as a criterion for the correspondence of one random variable to another. However, this approach does not have the necessary flexibility required to solve practical problems. The approach we propose allows you to compare fuzzy, fuzzy and clear, as well as clear and clear data. The paper will provide an example illustrating this approach. The material presented in the study was initially focused on managing organizational systems in education. However, its results can be extended to other organizational systems.

    Keywords: fuzzy data, weakly structured problems, comparison criteria, hierarchy analysis method, systems analysis, fuzzy benchmarking

  • Development of an information and analytical system based on GIS technology in the field of rational management of forest resources: stages, methods, examples

    The article presents the main stages and recommendations for the development of an information and analytical system (IAS) based on geographic information systems (GIS) in the field of rational management of forest resources, providing for the processing, storage and presentation of information on forest wood resources, as well as a description of some specific examples of the implementation of its individual components and digital technologies. The following stages of IAS development are considered: the stage of collecting and structuring data on forest wood resources; the stage of justifying the type of software implementation of the IAS; the stage of equipment selection; the stage of developing a data analysis and processing unit; the stage of developing the architecture of interaction of IAS blocks; the stage of developing the IAS application interface; the stage of testing the IAS. It is proposed to implement the interaction between the client and server parts based on Asynchronous JavaScript and XML (AJAX) technology. It is recommended to use the open source Leaflet libraries for visualization of geodata. To store large amounts of data on the server, it is proposed to use the SQLite database management system. The proposed approaches can find application in the creation of an IAS for the formation of management decisions in the field of rational management of forest wood resources.

    Keywords: geographic information systems, forest resources, methodology, web application, AJAX technology, SQLite, Leaflet, information processing

  • A mathematical model of a fault-tolerant nonlinear conversion unit for OFDM wireless systems with frequency hopping

    With the development of low-orbit satellite Internet systems (NSIS), issues of ensuring effective operation in conditions of intentional interference come to the fore. One of the solutions is related to the use of systems using both OFDM methods and generators implementing frequency hopping (HF). Obviously, the more complex the algorithm for selecting operating frequencies, the more efficient the operation of the microwave. In the article, it is proposed to use the SPN cipher "Grasshopper" as a generator for selecting operating frequencies. As a result, the CCF system will have a high resistance to calculating operating frequency numbers by electronic warfare systems. However, failures and failures may occur during the operation of the SSC. To prevent their consequences, it is proposed to implement an SPN cipher using polynomial modular codes of residue classes (PMCC). One of the transformations in the "Grasshopper" is a nonlinear transformation that performs the substitution operation. It is obvious that the creation of a new mathematical model for performing a nonlinear transformation using MCCS will ensure the operation of the SPN-cipher-based RF generator in conditions of failures and failures.

    Keywords: low-orbit satellite Internet systems, the Grasshopper SPN cipher, nonlinear transformations, modular codes of residue classes, mathematical model, fault tolerance, frequency hopping, polynomial modular code of residue classes

  • Experience of integrated domestic systems for information modeling of infrastructure on the example of Vitro-CAD Common Data Environment and Topomatic Robur software

    More attention is being paid to the transition to domestic software with the digitalisation of the construction industry and import substitution. At each stage of construction, additional products are needed, including CAD and BIM. The experience of integration of Russian-made systems for the tasks of information modeling of transport infrastructure and road construction is considered. Within the framework of the work the integration of Vitro-CAD CDE and Topomatic Robur software system was performed. Joint work of the construction project participants in a single information space was organized. The efficiency of work of the project participants was determined due to the release from routine operations. Integration experience has shown that the combination of Vitro-CAD and Topomatic Robur allows to manage project data efficiently, store files with version tracking, coordinate documentation and issue comments to it.

    Keywords: common data environment, information space, information model, digital ecosystem, computer-aided design, building information modeling, automation, integration, import substitution, software complex, platform, design documentation, road construction

  • Choosing the type of mother wavelet in fractal analysis in the problem of detecting computer attacks

    The study of statistical characteristics of network traffic allows us to detect its fractal features and estimate how the fractal dimension changes under cyber attacks (CA). These studies highlight the relationship between attacks and dynamic changes in the fractal dimension, which allows us to better understand how attacks affect the structure and behavior of network traffic. Such understanding is critical for developing effective methods for monitoring and protecting networks from potential threats. These observations justify the use of fractal analysis methods, including discrete wavelet analysis, for detecting CA. In particular, it is possible to monitor the fractal dimension of telecommunication traffic in real time with tracking its changes. However, the choice of the most appropriate mother wavelet for multiresolution analysis remains an insufficiently studied aspect. The article evaluates the influence of the choice of the mother wavelet type on the estimate of the Hurst exponent and the reliability of CA detection. The following types of mother wavelets are considered: Haar, Daubechies, Simlet, Meyer and Coiflet. The study included an experimental evaluation of the Hurst exponent on a data set that includes a SYN flood attack and normal network traffic. It was shown that the minimum spread of the Hurst exponent estimate for traffic with SYN flood attacks is achieved when using the Meyer mother wavelet with an analysis window of more than 10,000 samples and the Haar wavelets with an analysis window of less than 10,000 samples.

    Keywords: mother wavelet, computer attack, network traffic, Hurst exponent, wavelet analysis, fractal dimension

  • One of the Approaches to Analyzing Source Code in Student Projects

    When evaluating student work, the analysis of written assignments, particularly the analysis of source code, becomes particularly relevant. This article discusses an approach for evaluating the dynamics of feature changes in students' source code. Various metrics of source code are analyzed and key metrics are identified, including quantitative metrics, program control flow complexity metrics, and the TIOBE quality indicator. A set of text data containing program source codes from a website dedicated to practical programming, was used to determine threshold values for each metric and categorize them. The obtained results were used to conduct an analysis of students' source code using a developed service that allows for the evaluation of work based on key features, the observation of dynamics in code indicators, and the understanding of a student's position within the group based on the obtained values.

    Keywords: machine learning, text data analysis, program code analysis, digital footprint, data visualization

  • Technical science. Building and architecture

  • A nonlinear finite element model for calculating the shear force of I-beams made of ultra-high-strength concrete

    The development of methods for calculating structures made of ultra high-performance steel fiber-reinforced concrete (UHPC) in terms of strength and deformations is an important step towards the introduction of this innovative material into the practice of design and construction. This paper presents the results of finite element modeling of the operation of UHPC I-beam in the area of action of shear forces. The SMM model integrated in the OpenSees framework application is used for the walls of beams under conditions of flat stress. The authors have added new classes of materials that implement the averaged deformation laws of UHPC (with and without fiber) and the reinforcement placed in it. The calculations showed good convergence with the authors' own test results of the UHPC I-beams, as well as with the results of experiments by other researchers.

    Keywords: shear strength, shear force, ultra high-performance steel fiber-reinforced concrete, I-shaped beams, OpenSees

  • Structure of flat rod systems

    The choice of the method of force calculation of building structures is preceded by an analysis of the static determinacy and immutability of the rod system using structural formulas, while for different types of structures - for beams, trusses, frames, arches, etc. - sources offer different formulas. It is shown that for the structural analysis of all rod systems it is sufficient to determine the degree of structure anomaly using the formula of P.L. Chebyshev. The development of the linear-monad theory of structure makes it possible to formalize the dependence of the number of rods and hinges on the number of external and internal contours in the synthesis of both normal and anomalous structures

    Keywords: beam, truss, frame, arch, structure, analysis, synthesis, immutability, definability, degree of anomaly, rods, system, contour, monad, hinge

  • Identification of functional belonging and possible refunctionalization of rural areas for the needs of rural network structure (rural agglomeration)

    The presented article analyzes modern ways of qualitative assessment of agricultural territories in order to identify the existing principles to order and assess the prospects of development of such territories within the projected boundaries of rural network structure (rural agglomeration). The hypothesis about the key principles to which the ways of qualitative assessment of territories for the purposes of its urban development within the rural agglomeration should be prepared is presented.

    Keywords: rural network structure, rural agglomeration, qualimetric landscape method, functional belonging criterion

  • Organizational aspects of the integrated development of road and transport infrastructure in the urban agglomeration

    The organization and management of infrastructure construction has a direct impact on the level of comfort of residents, safety in the city, and the efficiency of the functioning of the city economy. In this article, based on an integrated approach, various features of the development of road and transport infrastructure in large cities are studied under the condition of their expansion in the process of urbanization, where roads play a connecting role between individual areas of the city and neighboring settlements in the common single space of the agglomeration.

    Keywords: road and transport infrastructure, sustainable development, urban space, agglomeration development, urban development

  • Application of the methodology for assessing the reliability of a construction project taking into account uncertainty

    The situation of occurrence, identification and management of risks arising during the construction process is analyzed. Uncertainty of decision-making in construction projects involves the creation of methods that ensure the reliability of decisions and their effectiveness. Such a method was developed in the Russian Project Management Association. The paper provides an example of using this method on a real construction site. An analysis of risks arising during the implementation of a construction project was conducted, a risk map was created for this project and the PERT method was applied when creating a calendar plan.

    Keywords: uncertainty, risk event, probability, risk, damage, danger, reliability, risk analysis, investment and construction project, PERT method

  • The use of dolomite flour in the production of concrete mix

    This article discusses the use of dolomites from the Bosninsky deposit in the production of building materials and products. This topic is very relevant at the present time, as the construction industry is developing, new types of structures are appearing, higher requirements are imposed on the physical and mechanical properties of concrete mixtures. Large volumes of concrete mix production require the use of local component deposits to improve technical and economic performance.

    Keywords: construction, building material, dolomite, environmental pollution, ecology, concrete mix, new technology

  • Determination of the dependence of the concentration of fine dust PM2.5 and PM10 in the atmosphere of residential areas

    Within the framework of the urban environment, the laws of distribution of the concentration of fine dust PM2.5, PM10 along road sections have been obtained. These data are necessary to assess the probability of exceeding the maximum permissible concentrations and to improve monitoring and control systems for atmospheric air. The analysis of the key factors influencing the content of PM2.5 and PM10 particles in the air of the territories adjacent to the roads has been carried out. Regression equations for total dust, PM2.5 and PM10 dust were obtained, allowing us to conclude that the concentration of PM2.5 and PM10 depends on total dust. The analysis showed that the mass content of PM10 in total dust pollution ranges from 73 to 81%, and the concentration of fine dust PM2.5 varies within two narrow ranges of about 11.6 and about 7 microns. A study of the proportion of PM2.5 of the total concentration showed that it is on average about 20%.

    Keywords: dust, emissions, concentration, atmospheric air, roadway, climate, linear city, correlation coefficient, influencing factors

  • Multidisciplinary research

  • Application of machine learning methods to the recognition of cardiovascular diseases

    This work is devoted to the study of the possibility of determining heart diseases on the basis of 13 categorical and numerical signs. We present a detailed analysis of the dataset, including dividing the data into training and test samples, dividing features into numerical and categorical, applying 4 different classification algorithms, checking the quality of the model using two techniques – delayed sampling and cross-validation. To assess the quality of the model, we pay attention to the value of the recall metric and the error matrix built on the test dataset from the deferred sample or on each test fold when using cross-validation. The results of the study are important both for a deep understanding of the relationship between certain medical indicators and heart disease, and for the development of effective methods for predicting them in the presence of individual symptoms.

    Keywords: cardiovascular diseases, classification task, quality metrics, cross-validation, recall, machine learning, random forest

  • An approach to filling in gaps in data on the operation of a hydraulic unit

    The paper provides a brief overview of publications on the application of mathematical modeling methods in the study of the patterns of functioning of hydroelectric power plants (HPPs). In particular, the following are considered: mathematical models of the total minimum water consumption for a cascade hydropower system in China; a mathematical model of hydropower plants; a mathematical model of two small hydroelectric power plants operating in tandem; accurate modeling of hydraulic transient characteristics in a complex drainage system. The task of filling in the gaps in the data concerning the operation of hydroelectric power plants is formulated. The approach to its solution is proposed to be based on the use of the method described in previous publications by one of the authors and based on the use of regression analysis apparatus. The specific task of filling in data gaps for a hydroelectric unit of one of the Siberian hydroelectric power plants has been solved. The following factors are used: active and reactive power of the electric generator, voltage, current and temperature of the stator iron, rotor current, air cooler hot air temperature.

    Keywords: hydroelectric power plant, electric generator, data gaps, predictive analytics, regression model, adequacy criteria

  • Grain boundary mechanism of fatigue crack growth

    Overhead power line wires are affected by various external factors such as wind, ice deposits, variable temperature conditions, excessive humidity. This eventually leads to fatigue failure of the wire. It consists in the origin and slow growth of a fatigue crack. The final stage of destruction is the sudden movement of the crack at high speed. The paper proposes a model of slow crack growth, at the mouth of which there is a grain boundary. Under the influence of external stress, a section of the border is a source of vacancies. The resulting vacancy concentration gradient between the grain boundary and the free surface at the crack mouth leads to a diffusion flow of vacancies into the crack. From the solution of the diffusion problem, the magnitude of the flow and the rate of increase in the crack length are found.

    Keywords: crack, grain boundary, vacancy diffusion, fatigue failure, air line, mechanical stress, vacancy flow

  • Reports on current research

  • Materials for 3d-printing: review of patents

    3d-printing is the leading direction in world advanced technologies. For today 2614 patents were displaying in the Worldwide date base. General Electric is more effective companies in patenting materials for 3d-printing.

    Keywords: materials for 3d-printing, review of patents

  • Hardware and software complex for controlling luminaires via the Dali protocol

    This article provides a description of the developed hardware and software complex for controlling lamps using the DALI protocol, design features and software code, recommendations for operation.and development of new production on available floor spaces. The most important organizational economic targets of a diversification of management are presented by innovative activity of the industrial enterprise.

    Keywords: DALI protocol, lighting device, lighting control, Arduino, luminous flux