Describes the characteristics of the formation of zones zaschischayuschihlinii power, railways, roads, communication lines and other linear structures, passing through forests of trees and shrubs.

Keywords: Key words and phrases: trees and shrubs, protection, linear construction.

Currently actively developing direction of seismic protection, the identified using absorbing screens made in the form of sandwich structures. The present paper presents a design руктивная scheme of energy absorbing panel, which allows you to raise, if used, seismic stability of constructions.

Keywords: Dynamic loading, uprugoplastichesky deformation, deformation chart, power absorption

The technique of the geometrical analysis and the analysis of force loading of combined drills with the replaceable multiface plates is offered in this work. This technique is allowing to determine geometrical parameters and specific force loadings in each point of a plate’s cutting edge taking into account its orientation in the drill case. Application of this technique allowed to establish the reasons of the drill’s low durability. The offered technique allows to design drills from the minimum unbalanced radial component of cutting force which increases its working capacity and the processed holes quality. New designs of combined drills both with two, and with three replaceable multiface plates are offered in this work. The durability of this new drills is increased by the plates mutual turn for the minimization of an unbalanced radial component of cutting force  

Keywords: combined drill, replaceable multiface plate, drilling, design, equilibration, geometrical analysis, the analysis of power loading

Personnel motivation strategy is a part of a strategy of the whole company. It is long-term plan of particular actions, which has an aim to develop personnel’s potential to the full extent. As an impact, this allows the company to have a competitive advantage in strategy.
There are a few main approaches to strategy development and, as a consequence, a few options of personnel motivation strategy.
When it comes to development of personnel motivation strategy, there are several stages that shall be competed, as follows: diagnostics of current personnel motivation strategy; development of main strategies, aims and principles of company’s motivation policy, as well as its content and structure;  development of employees’ material monetary and noncash remuneration, and non-financial reward; development of internal white papers in order to establish personnel motivation strategy; implementation and effect monitoring of established personnel motivation strategy.

Keywords: personnel motivation, motivation strategy, material remuneration, non-financial remuneration, effectiveness of personnel motivation.

Disassembling of NPP equipment, systems and metal constructions is a compulsory procedure in the final stage of NPPs work cycle, namely withdrawal. Disassembling technology is closely linked with some necessary conditions, that is why some mandatory requirements must be fulfilled.
The disassembling tasks can be carried out with the help of modern tech-nologies, means and instrumentware. The system of task-oriented engineering and adaptation to the environment and its conditions provides informational and me-thodical supporting in the process of developing the technology of equipment dis-assembling.   
This article presents the common methods and practical recommendations for developing the technological process of disassembling of NPP equipment.  

Keywords: NPP (nuclear power plant) unit, equipment disassembling, fragmentation, safety, permissible doses, remote control, engineering system, model, boundary condition, matrix

RFID technologies, one of innovative management methods by cargo  road transport is considered in the article. Definition, structure and advantages RFID of system are made. Scopes of system of Radio Frequency IDentification are considered for automation of motor transport.

Keywords: Freight transport, Radio Frequency IDentification (RFID), RFID-Label, Interaction of road transport and ports.

In article gasdynamic approach for the solution of a task on heat distribution in simple gas pipelines on the basis of consideration of a current of gas in a laminar mode is considered. The objective is solved by means of research of system of the equations of work of extending gas taking into account an assessment of difference of temperatures at explosive decomposition of a working product. Classical approaches to research of distribution of heat in a simple cylindrical pipe are thus taken as a basis the main dependences characterizing both full, and the current work of a working product by means of correction coefficients and a ratio of temperatures of heating of walls Are presented. Connection between pressure is established at different weight ratios of gas. The specified approach can be used as a technique of model research of gasdynamic processes taking into account a thermolysis in gas pipelines.  

Keywords: thermolysis, gas pipeline, gas work, temperature, pressure

A hybrid reverberation algorithm is offered in this article. This algorithm is using both a convolution section in which a convolution with an inmpulse response of a real acoustic room is being implied and a mathematical reverb model. Also an algorithm for generating impulse responses of optional rooms is also offered in the following article. The algorithm efficiency calculation is  specified in the article. Thia reverberation algorithm is a part of a bigger complez auralization algorithm where it is being used coherently with an HRTF-based algorithm in order to simulate a real acoustic environment  

Keywords: artificial reverb, room simulation, convolution algorithm, impulse response convolution, impulse response synthesis, dynamic convolution, complex filtering

It is noted that the services sector in the Rostov region isn't always accompanied by due quality and availability. Major factors which will affect dynamics of development of a services sector are defined. Dynamics of volume of paid services in subjects of the Southern federal district is analysed. The conclusion is drawn that the greatest possible ensuring requirements of the population of the region of the Rostov region in services of high level demands the unconditional solution of actual tasks which are also presented in work.  

Keywords: services sector, tendency, development, quality, dynamics.

The paper considers arbitrarily supported arbitrarily loaded reinforced, beam with an aggregate of bimodulus of elasticity material. Formulas for determination of the tangential stresses arising in the aggregate, subject to the reinforced elements. Formulas are obtained for principal stresses occurring at an arbitrary point in the aggregate, as well as the equation for determining the point where major stresses reach extreme values. Are terms of strength as the classical theories of strength, and strength criteria applied for calculation of constructions made of bimodulus of elasticity material.

Keywords: reinforced beam, bielastic modulus, stress, normal concrete, strength criteria.

Considered part of the software and hardware designed and manufactured the device for the automatic analysis of nonlinear parameters of high-temperature superconducting ceramics YBa2Cu3O7-x in variable magnetic fields. Shows the calibration and specifications. The new is a synchronous (the error in determining the phase of no more than 0.5%) of digital signal samples of the nonlinear response of the sample and the samples generated by an external magnetic field (the error is less than 1%), with the number of data samples per channel to 90 ∙ 106 12-bit samples and sampling 600 ∙ 103 samples per second. The reference range of variable magnetic fields 1 - 50 Oe, a frequency range of 1 - 50 kHz in steps of 1 Hz and the accuracy of 0.0291 Hz. The device has an interface to the computer via two USB-interface and original software to work with it. With the use of the device, a series of experiments designed to produce some non-linear parameters of cylindrical sample made of high-Tc ceramic YBa2Cu3O7-x. The analysis of the results and their comparison with the presented in the literature  

Keywords: Nonlinear medium, high-temperature superconducting ceramics, synchronous samples, harmonics, ARM-9 CPU, a differential sensor.

In a modified version of the adaptive clutch size of the spacer strength decreases due to a reduction of torque, which transmits the additional friction group, including, for the maximum value of the friction coefficient. Therefore, to save the value of the brace force is necessary to increase the ratio usileniya.Predlozhena concept modernized version adaptvnoy clutch with a combined feedback based on the formalization of the distribution of power factors for the closure of the main steam friction of the friction and more friction groups, allows you to simplify the design of the coupling compared to the base case  

Keywords: the coefficient gain, a separate positive connection, the coefficient of friction, clutch, friction pair

The article describes the experience of the device of pile foundations under the multi-storey building in difficult engineering-geological conditions in Rostov-on-don

Keywords: Drilling piles, test, conductor pipe, sandconcrete, foundation

An overview of research related to the tasks of processing and filtering of signals. Signal is considered as a random process defined by probabilistic characteristics. This article addresses the issues of the history of the development of methods of signal filtering. Recent scientific publications in which the results and the main directions of research in the field of signal processing and filtering are analyzed. Presented material extends the current state of knowledge about the problem.

Keywords: signal, signal filtering, signal processing, stochastic process

"This review covers various methods of synthesis LaMnO3 ferroics. The general analysis of the solid-phase synthesis reactions methods and wet methods (sol-gel, sorption, co-precipitation) are carred out. The original results of LaMnO3 syntheses from various precursors by means of the in situ method are showned. The advantages and disadvantages of different methods of synthesis are determined. The analysis of synthesis LaMnO3 ferroics published data is shown:
- the structure formation of LaMnO3 in perovskite-type phases occurs at different temperatures, depending on precursors states;
- LaMnO3 perovskite phases differ in symmetry and unit cells parameters at room temperature, depending on the preparation conditions;
- the highest synthesis temperature of LaMnO3 are typical for solid phase reactions method (950-1050 ° C), the lowest - for wet synthesis methods (500-700 ° C);
 - the synthesis conditions effect the stoichiometry of LaMnO3 for oxygen content.
Our studies of structure formation processes of LaMnO3 by in situ method are allowed to define the role of precursors states at synthesis of solid phase reactions methods, adsorption, co-precipitation and sol-gel mixtures.
It is determined that in samples prepared by wet chemical methods, the formation processes of  LaMnO3 perovskite phases occur at lower temperatures than by solid phase reaction (sol-gel precursor - 500 <T <600 ° C; precursors obtained by coprecipitation and sorption methods - at 600 <T <700 ° C and 700 <T <800 ° C, respectively).  

Keywords: ferroics, LaMnO3, X-ray diffraction, solid-phase synthesis, sol-gel synthesis, sorption, co-precipitation