The problem of manufacturing technology heterostructures pezofaza - metal considered in the article. Complexity consists in the fact that during the removal of the polymer in the system at low temperatures are formed porous layers, formed powders separated metal layers, having island macrostructure. One way to solve the problem - reducing the firing temperature heterostructures. Proposed to decrease the sintering temperature by using of functionally active glass-phases. Reducing the sintering temperature of products also allows to replace platinum electrodes inexpensive silver-based alloys. Obtained by solid state reaction method of piezoceramic material has a low sintering temperature (980 ° C) and high electrical parameters. Found that not only the proportion of the vitreous mass, but also their qualitative influence on the properties of piezomaterials    

Keywords: heterostructure glass phase, the sintering temperature, porosity, ferroelectric phase

Piezoelectric ceramics on the basis of the phase of (1-x) PbTiO3-xPbZrO3 is the basis of most high-performance piezoelectric materials. Electrophysical and mechanical properties of these materials can vary widely in different ways. Traditional methods include changes in composition within the morphotropic region and doping. Now is the study of the influence of topical makrolegirovaniya the material properties of the PZT system. As a model system was selected phase of the PZT system, the compositions of which MO belong, one of which contains a dopant in the sublattice (A) and another - in the sublattice dopants (B). The studies established that one of the effective ways of varying the parameters piezomaterials may be the formation of solid solutions on the basis of two or more piezoelectric phases having different combinations of electrical parameters  

Keywords: Piezoelectric ceramics, doping, kombinorovanie, pezofaza, piezo

Due to the depletion of the natural base of non-metallic minerals used for the production of high quality aggregates for concrete, and also because of the significant damage to the environment when working sartirovochnyh crushing plants becomes relevant greater use of fine-grained concrete on local , not always of high-quality materials. Rostov region has large reserves of river small and very fine sand , not suitable for the preparation of concrete mixes. The article suggests ways to improve the quality of fine concrete local fine sands with the introduction of their composition from fine mineral filler (the TMN ), the role of which carry waste production and processing opal - carbonate- kristabolitovyh kremnizemistyh flasks Maslovskoye deposit Rostov region. Chosen route of administration mikronaponitelya and optimal dosage , to analyze the impact of THM on Water-solid, water-cement ratio and the strength of concrete .

Keywords: fine-grained concrete on fine sands, mill ground mineral fillers, mikronapolnyayuschy effect flask, gain strength

In this paper the method works by Chinese artists - Taoists. Identifies the main principles of the above product: contemplation, insight into the phenomenon of identification with the object, inspiration, spontaneity, etc. Represented criteria for evaluating works of art and decryption are the leading graphic symbols.

Keywords: art education, didactics, Taoism, creative method, Taoist beliefs art, theory of art, painting, art

The technique of the geometrical analysis and the analysis of force loading of combined drills with the replaceable multiface plates is offered in this work. This technique is allowing to determine geometrical parameters and specific force loadings in each point of a plate’s cutting edge taking into account its orientation in the drill case. Application of this technique allowed to establish the reasons of the drill’s low durability. The offered technique allows to design drills from the minimum unbalanced radial component of cutting force which increases its working capacity and the processed holes quality. New designs of combined drills both with two, and with three replaceable multiface plates are offered in this work. The durability of this new drills is increased by the plates mutual turn for the minimization of an unbalanced radial component of cutting force  

Keywords: combined drill, replaceable multiface plate, drilling, design, equilibration, geometrical analysis, the analysis of power loading

Disassembling of NPP equipment, systems and metal constructions is a compulsory procedure in the final stage of NPPs work cycle, namely withdrawal. Disassembling technology is closely linked with some necessary conditions, that is why some mandatory requirements must be fulfilled.
The disassembling tasks can be carried out with the help of modern tech-nologies, means and instrumentware. The system of task-oriented engineering and adaptation to the environment and its conditions provides informational and me-thodical supporting in the process of developing the technology of equipment dis-assembling.   
This article presents the common methods and practical recommendations for developing the technological process of disassembling of NPP equipment.  

Keywords: NPP (nuclear power plant) unit, equipment disassembling, fragmentation, safety, permissible doses, remote control, engineering system, model, boundary condition, matrix

The representation of solutions for problem of steady state vibrations of multilayered poroelastic half plane is considered using the superposition of corresponding solutions for homogeneous poroelastic environments. This allows to analyze the influence of individual structural layers on the forming of displacement and stress fields and also give the analysis of energy streams with the refraction boundaries and wave types separation

Keywords: multilayered half space, steady state vibrations, Biot environment, superposition principle

The necessity to improve the grinding process of building materials used in the construc-tion of roads using mobile mo-bile plants, based on the con-centration of operations on a single machine, a diagram of a fundamentally new developed systems for their implementa-tion

Keywords: Mobile installations, roads, cement-concrete mixtures, crushing and grinding equip-ment, mill dynamic autogenous grinding, two-mill dynamic autogenous, factionalism, energy

Results of researches on joint influence of specific pressure of pressing and firing temperature on physico-mechanical properties of laboratory samples on the basis of atyukhtinsky clay raw materials is shown. For the purpose of increase of frost resistance of the burned samples into structure of masses entered a carbonat containing modifying additive in an amount of 5%. For a quantitative assessment of influence of the specified factors on the main indicators of the burned samples researches with application of mathematical planning of experiment and computer processing of results were conducted. Specific pressure of pressing varied within 20±5 MPa, firing temperature – 1000±50 0C. By results of experiment the regression equations are received. It is defined that at increase of value of both varied factors, frost resistance and durability of samples increase, and water absorption – decreases. It is shown that, operating even with two technology factors – the specific pressure of pressing and firing temperature – it is possible to change significantly properties of finished products, and, using the received equations, it is possible to predict future properties of products at a stage of their production.

Keywords: frost resistance, burned sample, modifying additive, specific pressing pressure, firing temperature, mathematical experiment planning

The article deals with the analysis of intermittent lanes priority based on simulation. The implementation of intermittent lanes priority system is only possible within the framework of urban intelligent transportation system (ITS).  In some cases, there are not always enough ITS components for the operation of intermittent lanes priority system. Based on the simulation it is possible to determine the efficiency of the intermittent lanes priority system with the minimum or complete number ITS components. To compare the effectiveness of intermittent lanes priority system the simulation was performed for the four scenarios:
1. Without the use of public transport priority
2.  Classically  marked priority lane
3. Using the intermittent lanes priority system with a minimum number of ITS components
4. Using the intermittent lanes priority system with the full amount of ITS components 
According the results of simulation we concluded that the minimal intermittent lanes priority system is noticeably inferior to a fully functional intermittent lanes priority system on the effectiveness, but such system does not require a high level of development of the urban ITS and can be considered as the first stage of a complete intermittent lanes priority system.  

Keywords: the organization of the bus lane priority, priority lane, intermittent bus lane priority, road capacity, controlled road signs, intelligent transportation system

The article discusses an innovative organizing method of the buses priority - a intermittent bus lane priority.

Keywords: the organization of the bus lane priority, priority lane, intermittent bus lane priority, intelligent transportation system

The article deals with the preparation of the leading schools of art of the early twentieth century in Germany and Russia. Determined the reasons for leaving between classical training and subsequent return to the system of art education to the academicism.

Keywords: coloristics, art education, color, professional education

Analyzes human capital as one of the key components of the innovation development of the Russian economy and the construction industry in particular. Shows the positive aspects of investment in human capital - increase in the level of education, improvement of nutrition and health, which leads to an increase in the productivity of capital, and reducing mortality, increasing life expectancy. To construction weak extent of development of the intellectual capital is typical, it is necessary to change this tendency. And, at the stage of recruitment to pay attention to human capital of seekers. It is noted, there where it is possible, importance of determination of potential of competitors without experience, with further training within the company, to please to professional skills. Continuous development of the human capital of the construction organization is a right way for the company, wishing to advance competitors and to get profit.

Keywords: human capital, innovation, construction, recruitment, staff, investment, development, education, the potential, profit

The possibilities of waveguide elements realization in the structure of multilayered integrated chips of centimeter and millimeter ranges with SIW (Substrate Integrated Waveguide)-technology application are considered. The approaches allowing effectively using in new structures the algorithms and techniques of the electrodynamic analysis and synthesis of passive devices on classical all-metal waveguides are offered. Advantages of use in SIW structure the waveguides of complex cross-section are considered on the example of the microwave band-pass filter.

Keywords: A.A. Gadzieva, V.V. Zemlyakov, S.V. Krutiev

  Laboratory technology was developed to fabricate flexible piezocomposites with ferroelectric phase - polymers having signal reception factorv • gv 5000 • 10-15 m2 / N. The values of the given coefficient were achieved by switching from a probabilistic (spontaneous) percolation to a correlated one in the process of forming material. This made the production of 0-1–3 piezocomposites, in which a part of piezophase has 0 connectivity, and the other part – 1 connectivity possible. To improve the efficiency of piezocomposite polarization before their manufacturing the surface of piezophase particles, which were obtained by the partial destruction of the porous frameworks, was treated with coupling agent, which did not only improve the polymer adhesion to piezophase, but also allowed the removal of water from the particle surface. The latter effect reduced the value of interfacial conductivity, i.e. prevented the voltage drop of the polarizing field. Matching of polymer conductivity and piezoceramic particles by determining the optimal polarization temperature was carried out as well.  

Keywords: piezocomposites, percolation, connectivity, electrophysical properties