The article presents the results of the development of wooden building blocks that allow to saturate the room air with phytoncides of Siberian and other species of wood and plants. Shows the fundamental design of the blocks, the features of its production and processing. An example of the positive effect of essential oils on the reduction of bacterial air pollution is given. Buildings and structures of the proposed unit are quickly built without the use of specialized equipment. The construction and reconstruction of such a structure can be more effective in terms of both labor costs and terms of work, in comparison with traditional construction practices. Production of buildings from the offered blocks opens prospects of low-cost construction of low-rise constructions, both residential, and industrial use.

Keywords: wood building material, environmental friendly, wood processing, resin, essential oil, extract

Mathematic modeling of the state of a thin round disk being heat and force affected is performed. In the central part of the disk the homogeneous field of temperatures is formed. Within the deformation theory of a perfect elasto-plastic solid the quadratic plasticity condition is chosen. The relationships between the radius of the disk, the temperature of the central part of the disk and the external pressure which defines the appearance of plastic zones have been established. For different values of external parameters of the model the stress vector hodograph and the plots of stresses and equivalent stresses have been introduced.

Keywords: mathematic modeling, an elastic-plastic solid, the plane-stress state, the deformation theory, thermo-elasto-plasticity, a high-speed rotating disk

The process of cavitation is one of the reasons for the premature wear of pumping equipment components. Elements of a pumping wheel are subject to the greatest wear. In addition, cavitation causes undesirable effects such as vibration and noise. In order to reduce cavitational damage and increase the service life of pumping equipment, the authors of this article propose to install a special-shaped flow divider at the pump inlet that breaks the flow entering the pump into separate jets of a certain shape and structure.

Keywords: fluid, centrifugal pump, regulation, cavitation, flow, bubble, flow divider

The article provides a technical solution to increase the bearing capacity and reduce the deformability of the subsiding base of a house. The design features of the fixed base and enclosing rows of bored piles are described. The article was published in the framework of the program of the International Forum "Victorious may 1945".

Keywords: row, anchoring grounds, reinforcement, soil, cement, cementation, directional hydraulic fracturing

The object of research in this article has become a rather important topic of describing such a statistical method as analysis of variance. The fact is that many software products consider, basically, a case when the number of factors is not more than two. With the exception of such a powerful product as a SPSS Statistica. The same can be attributed to scientific works, where the method of analysis of variance with a large number of factors is very rarely considered and described (often, when it comes to multifactorial analysis of variance, two factors are also considered). Therefore, an analysis was made of the existing mathematical apparatus, a proprietary idea was proposed for the implementation of this statistical method, and was created a software product to demonstrate how its work.

Keywords: variance analysis, general case, software implementation

In this paper, research on the development of methods for the production of thermoplastic elastomers for construction purposes based on styrene-butadiene-styrene rubber filled with expanded perlite, studied the performance characteristics of these materials. Various methods for the modification of thermoplastic elastomers, their processing modes and methods of controlling their properties are considered.

Keywords: thermoplastic elastomers, expanded perlite, production methods, material characteristics, density, physical and mechanical properties

In work area of application for quantitative metrics of databases are considered. Quality control of the database scheme is impossible without numerical indicators. Metrics of the database can be calculated it is automated that guarantees the accuracy and recurrence of such measurements. In article the model for assessment of complexity of the physical scheme for relational database based on metrics of the table of the database is offered. For the offered model by using the method of T. Saati, received coefficients which consider extent of influence of each metrics on complexity of the database. On the example of real projects for databases quantitative measurements of their metrics in MySQL are executed. The comparative analysis of the results obtained for the model of complexity estimates for various projects of physical schemes for databases and the amount of information contained in sql-scripts of these databases are described.

Keywords: evaluation of complexity, database, physical schema, model, SQL, entropy

This article is devoted to the issue of rational exploitation of space in cities with a large population. It is known that a sharp decrease in the area of land plots within the city limits accessible to public use leads to a decrease in the quality of life of citizens. The authors of this article are considering in detail the possibility of using roofs as additional public spaces. The article discusses such methods for using roofs as solar power generation, rainwater harvesting, apiaries and poultry farms, sports complexes, playgrounds, vegetable farms, etc. Particular attention is paid to the so-called ""green roofs"", their design, classification, application. The authors of this article talk about the numerous advantages of green roofs, such as the ability to manage wastewater, reduce the influence of “urban heat islands”, create new public spaces, create new jobs, increase energy efficiency, reduce noise, increase market value, etc. However, the authors of this article did not forget to show the disadvantages of green roofs. The main disadvantages of this project are the higher initial cost, the increased load on the foundation and walls, and the increased costs of operation. Nevertheless, the authors draw conclusions that the advantages of green roofs far exceed their disadvantages and the further development of this direction is very important and promising. 3. Installation of active seismic resistance monitoring systems (active method). Such an active feedback control system contains three main elements: a. Sensors for measuring external excitation; b. Computer hardware and software; c. Drives to provide the necessary control forces. At present, the most popular is the hybrid method of semi-active control, which combines the advantages of a seismoisolating basement with passive shock absorbers, which is much more economical in comparison with the active method.

Keywords: city, roof in operation, green roof, dense urban development, energy saving, ecology, green building, green building

The article discusses the results of the development of a pilot plant that allows for the process of purification of multicomponent wastewater containing organic impurities of the phenol series based on a combined method in a single apparatus, consistently combining the process of ozonation with the sorption post-treatment of oxidized wastewater, ensuring continuity of the process and allowing the reuse of residual ozone, which greatly increases the degree of wastewater treatment and eliminates the need bridge of ozone destruction. The degree of purification achieved in this way allows the treated wastewater to be directed to the circulating water supply.

Keywords: multicomponent wastewater, wastewater treatment from organic compounds of the phenol series, ozonation, sorption, adsorption, pilot plant

Innovative organizations have begun to use fixed-wing Unmanned Aerial Vehicles (UAVs) for healthcare delivery since they can fly faster and provide a proper solution in locations with difficult access or unsafe to human life. Moreover, they assure greater utility and better cost effectiveness than manned aircraft. However, the wind affects both the longitudinal and the lateral variables of the fixed-wing UAV contributing to its nonlinear and due to such external disturbances the UAV can fail its mission. Therefore, this review paper discusses on effects of wind disturbances on navigation of fixed-wing UAV. Full nonlinear equations of motion by including the effects of the wind on the fixed-wing UAV performance are developed. Also an overview of different approaches is presented.

Keywords: Unmanned aerial vehicle, fixed-wing UAV, navigation control, wind disturbances

An optical sensor for measuring small displacements and rotation angles is described. Based on a non-contact principle of operation, which can be used to control small movements in installations to determine internal friction by the type of torsion pendulum. The main characteristics of the device are shown and the installation and connection diagram is shown by means of the ADC to the computer

Keywords: optical sensor, angle of rotation, displacement, internal friction, microcontroller, torsional pendulum, photoresistor, signal filtering, signal transmission, non-contact, ADC

“The article was published as part of the implementation of the program of the International Forum“ Victory May 1945 ”.The article deals with the problem of a reasonable redistribution of the pedestrian and transport space of the street, a balanced use of the territory in order to more efficiently regulate traffic and pedestrian flows, as well as to take into account statistical data on the use of street space, taking into account the time of day, the location and methods of using this space

Keywords: pedestrian space, sidewalk, transport space, pedestrian, parquet, design of architectural environment, urban scenario

In this paper we consider the problem of choosing an acceptable system of collection, transmission and display of information of the coastal control center of Autonomous uninhabited vehicles (ANPA) in the theory of decision-making. In the case of an exponential decision-making system, which provides a hypothesis about the acceptability of the system of collection, transmission and display of information, it is necessary to determine the total time of semantic identification of forest topology "A" - graph [1] (the principle of additivity). This requires additional test experiments or known data on the time of understanding the semantics in specific situations. If this time is less than the normative, or more precisely the time of compromise, then such a system of collection, transmission and display of information can be recommended for operation in an exponential decision-making system. Otherwise, such a system cannot be recommended to the decision-maker of the type under discussion.

Keywords: the system of collection, transmission and display of information (TDI) of the communication center of the coastal control center (as CCCCC) Autonomous uninhabited devices (AUD), decision-maker (DM), cognitive function of DM

Despite numerous advantages, green construction has not yet acquired significant proportions, since modern environmental technologies in construction lead to increased costs, and legislation is also not being adapted to new certification systems. This article outlined the main objectives of "green" construction. Considered the most important principles on which it is based. Analyzed the modern "green" standards for environmental performance of buildings, discussed in detail the methods for determining the rating of a building on specific scales. The advantages and disadvantages of environmental standards were also noted, groups of organizations in the field of “green” construction in Russia were considered.

Keywords: environmental technology, green building, green standards, energy saving, energy efficiency, energy consumption, green building, renewable energy sources

The possibility of using an effective insulation of rigid slabs of non-combustible basalt insulation ROCKWOOL not only to ensure the thermal properties of the outer walls, but also to improve the plasticity of the facades of buildings, due to the device protruding on the facade of vertical pilasters, horizontal belts, volumetric geometric patterns using the facade system ROCKFACADE. According to the results of the study on this topic, the conclusions are given.

Keywords: effective insulation, non-combustible mineral wool ROCKWOOL insulation, outer wall, plastic, building facade, pilasters, belt, ROCKFACADE