Products made of gypsum binders have heat and sound insulation properties, fire resistance, high technical, economic and environmental indicators, which are used in construction in the construction of internal walls and partitions, the total area of which, as a rule, is several times larger than the area of external walls. By reducing the density of gypsum products due to the introduction of light aggregates, it is possible to reduce the mass of walls, lighten the building, reduce the load on foundations and reduce the cost of construction, while improving thermal protection. However, traditional lightweight fillers increase the water demand of the mixture and reduce the strength of the material. Therefore, in the article, the purpose of the study was to determine the optimal composition of gypsum compositions with various types of filler to obtain the best set of properties of the obtained samples.

Keywords: gypsum concrete, perlite, vermiculite, experiment, filler, density

The article considers examples of atmospheric air monitoring in linear and compact cities. The issues of atmospheric air pollution are considered, examples of components of pollutants coming from stationary and mobile sources are given. The analysis of the monitoring system of cities with different urban planning is carried out.

Keywords: linear city, compact city, highway, pollution, monitoring, monitoring posts, motor transport, gas pollution, exhaust gases

This article presents the main recommendations for the construction of nodes of solid-wood structures. The basic scheme of the rigid junction of the meridional edges is considered. Based on the results of tests and calculations, conclusions are drawn on the possibility of improving this node. Some recommendations for strengthening the node without increasing the metal capacity of the structure are presented. Several schemes for improving the welded structures are shown. Conclusions are drawn on the possibility of implementing the examples given in the designed structures.

Keywords: Wooden structure, full-size samples, mechanical connections, solid wood, prismatic arch, mounting element, polymer concrete, design model, continuous girder, prefabricated structures

The technical solution for the construction of local treatment of return drainage flow from an irrigated area, based on the use of ion-exchange filter materials, is proposed. It has been established that the concentration of chemicals in the water of the drainage well is 1/3 lower than in the open collector, where the drainage flow is diverted. Therefore, the localization of the technological unit for the treatment of drainage water relative to the drainage well is a reasonable decision, since it will reduce the financial costs of filter media and the frequency of their replacement. The technological scheme of the treatment plant based on the block principle is described: by disconnecting or connecting individual blocks, it is possible to respond flexibly to changing needs in the quality and degree of drainage water treatment.

Keywords: technical solution, water treatment, ion exchange, drainage flow, block approach, drainage well, water quality, chemical analysis, land reclamation, irrigation system

In this article, the stress state of a wooden beam reinforced with polymer composite reinforcement made of carbon tape of various lengths is investigated. The minimum required length of a carbon fabric-based reinforcing tape is determined in the most loaded lower stretched zone of a single-span solid-wood beam.

Keywords: solid-wood beam, polymer composite construction, carbon fabric tape, physical and mechanical characteristics of the composite, design load, place of breakage of the reinforcing tape, stress state of the beam, stress concentration zone

The paper considers a data visualization model of numerical simulation of a convective cloud. Data visualization is used for visual representation and analysis of processes in a convective cloud. New methods and approaches to visualization of results based on modern technologies and algorithms, such as real-time visualization and the use of calculations on GPUs. An approach to automating the process of rapid qualitative analysis are presentedThe paper aims to create a specialized software for three-dimensional visualization. This software is used for tasks related to the study of complex processes of interaction of processes in a convective cloud based on a numerical model with detailed microphysics.The article considers a data visualization model for numerical simulation of a convective cloud. Data visualization is used for visual representation and analysis of processes in a convective cloud. New methods and approaches to visualization of results based on modern technologies and algorithms, such as real-time visualization and the use of calculations on graphics processors, are presented. The approach to automating the process of rapid qualitative analysis of numerical simulation data is to create specialized software for three-dimensional visualization. This software is used for tasks related to the study of complex processes of interaction of processes in a convective cloud based on a numerical model with detailed microphysics.

Keywords: application program, three-dimensional visualization, numerical simulation data, machine graphics, visualization model, cloud parameters, modeling

The object of the study is the method of evaluating the durability of the cutting tool, which evaluates the rationality of the periodicity of changing the cutting tool during turning on the basis of the indicator of vibration. To form a signal for the analysis the registration of vibroacoustic vibrations during the processing of parts by the device for measuring noise and vibration VShV-003-M2 takes place. To check the transfer function used in the methodology the construction of the model of dynamic system of the lathe is made. The construction of autocorrelation function and amplitude-frequency response of the dynamic system is used to estimate the durability according to the oscillation index. A series of tests to estimate tool life under recommended cutting modes are made, and the results are corrected according to the obtained results. Record of files for the analysis was made in a wave-file format. Analysis of the results made it possible to make recommendations for tool change intervals for better control of tool and labor rationing. Knowledge of the durability of cutting tools is necessary for timely replacement of cutting inserts and control of losses in production.

Keywords: vibration index, catastrophic wear, tool, cutter, tool life, condition monitoring, vibration, lathe, sensor

When conducting quality control, it is necessary to consider the quality of both each individual element of the facade and the quality of the hinged facade as a system. When structuring the review of tools for instrumental quality control of curtain facade systems, their application should be considered according to controlled parameters, which can be divided into two groups. The quality control group of facade system elements combines methods and tools used in quality control of building materials and does not require the contractor to know about the principles of the hinged facade system. The quality control group of the device (assembly) of the hinged facade consists of operations to determine the quality of the operability of the hinged facade system. This group is entirely based on the idea of the work of the hinged facade as a single system. Based on the results of systematization and generalization of data, it was concluded that the current regulatory documentation regulates the use of instrumental control tools, leaving aside the issues of organization that come to the fore when quality control of the hinged facade of a construction object as a whole, when there is a task of choosing and using several tools of instrumental control at the same time. It is these questions that should be the subject of further research.

Keywords: systems of hinged facades, quality control organizations, a systematic approach in the organization, instrumental control, elements of the facade system, the device of the hinged facade, methods and means of control

The purpose of this work is to develop a list of possible categories of the need for major repairs and appropriate criteria for evaluating structural elements and in-house engineering systems. In the process of working on this study, methods of statistical data collection and expert evaluation were applied. As a result of this study, a table of the Category of the need for major repairs of apartment buildings, Criteria for assessing the need for major repairs of apartment buildings, was also presented by the algorithm of actions of a specialist in determining the need for major repairs of apartment buildings. This work is an effective and relevant method for determining the need for major repairs of apartment buildings in comparison with VSN 53-86(p) "Rules for assessing the physical wear of residential buildings".

Keywords: major repairs, apartment building, expert evaluation method, operational reliability, category, criterion

The article is devoted to solving the important problem of developing interactive maps that reflect the diversity of natural and historical heritage in cultural landscapes in order to solve the problem of managing the territorial systems of a cultural landscape. The main objects of mapping are natural-social-production systems - metageosystems, their recreational and tourist potential and the degree of its development. Results. The interactive map "Natural and cultural heritage of the Republic of Mordovia" was developed using the methods of object-oriented design, UI / UX design and programming and implemented as a web portal, the core of which is semantic search and geodata visualization tools. The methodology presented in the article for developing a digital interactive map of tourist and recreational metageosystems is based on geoinformation modeling and the effective use of diverse information about the region.

Keywords: geoportals, cultural landscape, spatial data infrastructure, management in organizational systems, spatial data, decision making

In the modern world, the issue of the importance of energy conservation and energy efficiency improvement in various areas, including the housing and communal sector, is quite acute. The use of modern energy-efficient materials and technologies in residential buildings, including during the overhaul of residential buildings, makes it possible to reduce energy consumption and save significant funds for citizens on utility bills.

Keywords: energy intensity, energy efficient technologies, energy saving, housing and communal services, overhaul

The work is devoted to ensuring the completeness of mixing of gas coolants into a direct-acting heat exchanger by optimizing the geometry of the mixing chamber, in particular the addition of a funnel. Four funnel configurations in the range of 45°-180° are considered. The problem is solved in a stationary formulation by numerical simulation in the OpenFOAM environment. A 14-fold increase in the uniformity of mixing is shown when using a 45° funnel compared to a cylindrical mixing chamber.

Keywords: heat exchanger, mixing heat exchanger, efficiency improvement, outgoing flue gas, numerical modeling, heat recovery

The article presents a feasibility study of the use of the izoproflex-115A pipeline based on thermal and hydraulic calculations of existing thermal networks in Saransk. When modeling two variants (pipe networks made of steel in polyurethane foam insulation and polymer pipelines "izoproflex-115") of pipelines, the same technique was used. Analysis of the calculation results of the longest section of the heat network showed that ISOPROFLEX pipes, on average, have a three-fold capacity reserve in relation to a steel pipe. The use of modern izoproflex-115A pipeline systems will ensure high-quality and uninterrupted heat supply to consumers, increase energy security and energy efficiency, reduce the accident rate of heat supply systems and improve the financial performance of heat supply organizations.

Keywords: heating networks, pipeline, reserve, capacity, heat supply, consumer, insulation, electronic model, isoproflex-115A, Zulu Thermo

The species diversity was studied and the ecological state of the tree and shrub vegetation on the territory of one of the oldest and largest parks in Rostov-on-Don - Maxim Gorky Park of Culture and Recreation was assessed. An area of 33,000 m2, located in the north-eastern part of the park, was allocated for study. 17 species of woody and shrubby plants were identified in the study area, among which the park-forming species are European linden (Tiliaeuropaea), Evergreen cypress (Cupressussempervirens L.), Common pine (the vital state of plants,the nature of the herbage closability, woody and shrubby plants, grassy lawn covering, urban park landscapes, the Park of Culture and Recreation named after Maxim Gorkiyabsence of signs of weakening (55%), and dead wood is only 1%. The quality of the lawn covering is quite low, and the soil under it is characterized by high compaction. Basically, the nature of the closure of the herbage is mosaic–group, and the projective coverage reaches maximum values (80%) for the entire study area in the early spring. Measures to preserve and optimize the park area are proposed.

Keywords: the vital state of plants,the nature of the herbage closability, woody and shrubby plants, grassy lawn covering, urban park landscapes, the Park of Culture and Recreation named after Maxim Gorkiy

To assess the quality of the road surface, there are many systems that work on the basis of specific algorithms, including image segmentation methods. Time complexity and classification accuracy are two key indicators when evaluating the effectiveness of a particular algorithm. In this article, the following image segmentation methods are used as the analyzed methods: k-means clustering, Linear clustering, Adaptive thresholding, Global thresholding. Based on the methods described in the section "Methodology of experiments", the "Global thresholds" method has the best indicators of classification accuracy and time complexity (38.2% - classification accuracy; time complexity is linear (other methods have the same type of complexity, however, GT has much less absolute time indicators).

Keywords: comparison, method, segmentation, image, photo, road, surface, condition, accuracy, classification, time, complextion