The paper reveals the problem and causes of the formation of fetid compounds in the systems of transportation and wastewater treatment. Various methods used at the moment to eliminate and neutralize unpleasant odors, as well as a number of measures to clean the air from fetid compounds are considered. A new method is described to prevent the formation of odors of fetid compounds in wastewater transportation and treatment systems and a device for its implementation using low-intensity cavitation. The scheme of the device for sewage treatment from smells of fetid compounds. The principle of operation of this installation is described.

Keywords: fetid compounds , air purification, biological purification, low-intensity cavitation

The article presents an analysis of objects with concrete-filled steel tube columns. Also the article describes methods for solving the concomitant disadvantages and describes ways to increase the effectiveness of this solution. Prospects for studies of increasing the adhesive component of the mutual work of the concrete core and steel shell are presented. The analysis allows you to give recommendations on the following issues: improving the technological level of concrete-filled steel tube columns, the convenience of joining the column with the frame.

Keywords: concrete-filled steel tube columns, combined steel and reinforced concrete structures, tubular section, fixed formwork, steel cage, concrete core, adhesion of materials, side compression effect, frame building, construction in the low-temperature conditio

The problem of creating semiconductor thermoresistors (PTR) capable of dissipating large amounts of heat is an urgent problem of semiconductor technology. The article presents a brief analysis of the possibilities of using high-power ATGM, the picture of the distribution of thermal fields in the mass of the thermistor under certain boundary and initial conditions. It is shown that when selecting a thermistor material, special attention should be paid to the specific thermal conductivity of the material.

Keywords: High power thermistors, current density, thermal conductivity, energy balance, similarity criteria

Systems that allow generating programs for monitoring the state of technical objects are explored. The generation of programs involves the construction of models of objects from the data received from them and the construction of data collection processes. The dependences of the complexity of the generation of models of monitoring objects on the dimension of the input stream, the dimensions of the characteristic vectors describing the state of the elements of the objects of monitoring, as well as the dependences of the complexity of the generation of data collection processes on the number of structural levels of objects, the number of information elements on each level, and the probabilities of generating processes on each of the levels. Based on the results obtained, recommendations are formulated on the use of monitoring program generation systems in solving practical problems in particular domain: recommendation on selecting right balance between often and rare model rebuilding and expediency criteria of the monitoring process generation system usage.

Keywords: complex technical object, monitoring, program generation

This article concentrates on the issues of radio wave propagation in forest conditions. The issue of representing the forest mass as a heterogeneous structure with a low dielectric constant is considered. Calculation and comparison of radio signal attenuation using several empirical models were carried out. It is shown that empirical models take into account the heterogeneous structure of the forest when moving from free space to the forest.

Keywords: radiowave propagation, wooded area, empirical model, radiowave attenuation, path loss, ground mobile communication, electrodynamic characteristics of a heterogeneous structure

Thermal imaging technology has become one of the most valuable diagnostic tools for inspecting and inspecting buildings and structures. This article describes the features of this method, the history of its creation, the basic principles of thermal imaging cameras. The authors of the article show the scope of thermal imaging technologies and their place in the construction industry. This article describes in detail both the positive aspects of thermal imaging technologies and their shortcomings. The authors concluded that thermal imaging cameras are a universal tool, and new innovative ways to use them have become a key technology for construction inspection work around the world.

Keywords: thermal imager, thermography, thermal imaging device, building inspection, reconstruction, energy audit, construction diagnostics, thermal imaging

In this research the research problem of the liquid cooling system of supercomputer processors on nanomagnetic liquids by numerical modeling and the pilot study of processes of heat convection in the studied object is set. In article results of numerical modeling and the pilot study of process of the heat transfer are given in the heat exchanger of the liquid cooling system of supercomputer processors on the basis of nanomagnetic liquids, or ferroflyuid at influence of magnetic field impact assessment of magnetic field on the thermal resistance of the system and coefficient of heat convection the wall liquid Is made at different strengths of magnetic field. The numerical model of process of the heat transfer in the system the processor heat exchanger was investigated.

Keywords: processor, thermal resistance, Laplace equation, liquid computer cooling system, ferrofluid, nanomagnetic liquid, heat transfer, heat transfer coefficient

metamaterials, microwave, antennas, diffraction, Maxwell equations, electromagnetic waves, the dielectric constant

Keywords: metamaterials, microwave, antennas, diffraction, Maxwell equations, electromagnetic waves, the dielectric constant

The problems of irrational expenditure of energy resources leading to the depletion of natural reserves of fossil fuels and environmental pollution are considered. The analysis of the main issues considered in the course of improving solar heat supply systems is carried out. Current scientific, practical and statistical data are systematized, in the process of which ways to increase the efficiency of active solar systems are proposed.

Keywords: solar heat supply systems, energy saving, thermal energy accumulation, energy storage, thermal energy conservation, solar installation

The main maintenance of a diversification of production as activity of subjects of managing is considered. being shown in purchase of the operating enterprises, the organizations of the new enterprises, redistribution of investments in interests of the organization and development of new production on available floor spaces. The most important organizational economic targets of a diversification of management are presented by innovative activity of the industrial enterprise.

Keywords: diversification of management, production diversification, financial and economic purposes of a diversification, technological purposes of ensuring flexibility of production

Models of monitoring program generation systems are proposed. to significantly reduce the cost of time and other resources for monitoring complex technical objects. Systems are considered at several levels: subsystems and modules, communication links, use cases, physical representation. A technique for adapting system models to subject areas.

Keywords: complex technical object, monitoring, models of software systems, program generation

Automation of agriculture is currently a promising and actively developing branch of robotics. At the moment, there are many foreign analogues offering ready-made solutions for automatic control of sowing crops. However, in Russia, most of the sowing is carried out on mechanized plants under the mandatory supervision of a highly qualified specialist in the maintenance of the plant.

Keywords: seeding control, microprocessor system, selection, seeding algorithm, system architecture, hardware, system structure, layout base, management methodology, import substitution

Automation of agricultural production is one of the main tasks in the modern world. One of the areas of agriculture, which is primarily in need of automation, is selection, since manual labor is used in most technical operations. This article discusses the software with which the system of intelligent seeding will be implemented.

Keywords: intellectual seeding, software, selection, seeding algorithm, interface, hardware, process structure, data block, calculation procedure, import substitution

Cities around the world lack land resources, despite the fact that the housing stock is in a state of extreme deterioration. The solution to this problem becomes such a concept as renovation - the process of updating urban space. This mechanism is currently provided for in the Town Planning Code of the Russian Federation, but for a number of reasons its implementation in practice is limited. Renovation is necessary in the prevailing conditions of the modern world in order to adapt the spaces of former industrial zones for their use in an already new format. The vast majority of industrial companies cease to operate within cities, and their territories turn into neglected neglected development, isolated from the urban social environment. The authors of this article reviewed and analyzed the benefits of implementing renovation programs for residents of the Russian Federation.

Keywords: renovation, eco-construction, depressed territories, modernization of urban areas, development of regions, redevelopment buildings

Models of monitoring program generation systems are proposed that can significantly reduce the cost of time and other resources for monitoring complex technical objects. Systems are considered at several levels: subsystems and modules, communication links, usage scenarios, physical representations. A technique for adapting system models to subject areas is proposed.

Keywords: complex technical object, monitoring, models of software systems, program generation