The processes happening in system of power supply of the AVO electric drive of gas are considered. The analysis is carried out and the assessment of consumption of electric energy of AVO of gas is executed.

Keywords: compressor station, device of air cooling of gas, mathematical statistics

Photometric principles of measurements have found a wide recognition and a wide application in different fields of human activity. It is stipulated by the introduction of photogrammetric works of new technology for obtaining primary information about the locality. At present for obtaining high quality and highly exact airophotographic data digital wide format photographic cameras are used and photogrammetric processing of digital pictures is carried out at special digital photogrammetric work stations.
A great importance is attached to photogrammetric methods during the monitoring of lands for information providing of state realty cadastre. At present land state monitoring is a modern technical trend to provide this cadastre with the necessary graphic and digital documents.
Photographing of small territories (dacha settlements, agricultural buildings etc.), when the scale of airophotography is ten or more times less than the scale of map-making, is quite possible because the object can be photographed on two pictures that is to be located on one stereo pair. This article is devoted to photogrammetric processing of a single stereo pair. At this space facilities for positioning (GLONASS, GPS) secure the coordinates and altitudes of points of photographic. When space signals are properly synchronized with the work of the photograph camera shutter and careful determination of the elements of adjustment of space antenna to the relative centre of projection (s) of camera is carried out the coordinates of projection centres can be used as supporting geodetic points.
Point realization of the above-mentioned terms allows to decrease the number of supporting points necessary for outside orientation of model to one. It should be located at the end of stereo pair opposite its middle. While designing redundant supporting points (for control and improvement of exactness) they should be located in the corners of stereo pair.  

Keywords: photogrammetry, stereo pair, single model, conditions of complanarity and collinearity, elements of orientation, points for photographing, GLONASS, GPS, theory, algorithm.

To assess the genotoxicity of environmental urban ecosystems appropriate to use indicators geno-and cytotoxic extract pilezii Multiflora. Geno-and cytotoxicity of the extract can be assessed by the level of chromosomal aberrations, as well as indicators of the mitotic index in the root meristem of pea, germinated on an extract pilezii Multiflora. When using indicators geno-and cytotoxicity in urban ecosystems should talk about the genotoxicity of the environment in the case of a statistically significant difference from the control of these parameters.

Keywords: biomonitoring, mutagenicity, test object, chromosome aberrations, cytotoxicity, genotoxicity

The paper presents an algorithm for calculation program the dispersion of pollutants in the air of industrial premises. The program is designed to evaluate the effectiveness of sanitary hazards of capture

Keywords: efficiency of capture, pollutants, air quality, algorithm, method of large particles

In article dynamics questions formation of drop ablation at destruction of bubbling streams are considered at a rupture of bubbles, experimental data of some characteristics of processes of destruction of streams are given, the analysis of the factors influencing formation of drop ablation is made

Keywords: drop ablation, bubbling, drop, stream, blanket

In article questions of pilot studies of disperse structure of drop ablation are considered when putting electroplated coatings, the technique of performance of experiment is given, the design of experimental installation is considered, results of researches of dependence of height of take-off of drops of ablation over an electrolyte surface from their effective radius are given

Keywords: electroplated coatings, drop ablation, bubbling, drop, height of take-off of a drop, effective radius of a drop

We study the problems in the propagation of acoustic waves of a sound range near the boundaries of media. The features of the wave processes occurring at the water-air interface, due to the influence of inhomogeneous waves. Considered in detail the properties and parameters of an inhomogeneous plane wave. The mathematical calculations of the transmission coefficients L.M. Brekhovskikh for spherical and cylindrical waves through this boundary, allowing to take into account the contribution of inhomogeneous components. It is shown that than the frequency of radiation of a source is lower and the closer it is located to water-air interface, the acoustic transparency of this border is higher. Study of the dependence of the transmission coefficient of the water-air interface at low frequencies can have important consequences in a number of fundamental and applied problems. Increase the transparency of the interface requires a reassessment of the feasibility of acoustic communication from water in the air, the detection of underwater sources without dipping into the water and acoustic monitoring of the physical processes occurring in the water.

Keywords: Inhomogeneous plane wave, water-air interface, transmission coefficient, wavelength, spherical wave, acoustic impedance.

"This review covers various methods of synthesis LaMnO3 ferroics. The general analysis of the solid-phase synthesis reactions methods and wet methods (sol-gel, sorption, co-precipitation) are carred out. The original results of LaMnO3 syntheses from various precursors by means of the in situ method are showned. The advantages and disadvantages of different methods of synthesis are determined. The analysis of synthesis LaMnO3 ferroics published data is shown:
- the structure formation of LaMnO3 in perovskite-type phases occurs at different temperatures, depending on precursors states;
- LaMnO3 perovskite phases differ in symmetry and unit cells parameters at room temperature, depending on the preparation conditions;
- the highest synthesis temperature of LaMnO3 are typical for solid phase reactions method (950-1050 ° C), the lowest - for wet synthesis methods (500-700 ° C);
 - the synthesis conditions effect the stoichiometry of LaMnO3 for oxygen content.
Our studies of structure formation processes of LaMnO3 by in situ method are allowed to define the role of precursors states at synthesis of solid phase reactions methods, adsorption, co-precipitation and sol-gel mixtures.
It is determined that in samples prepared by wet chemical methods, the formation processes of  LaMnO3 perovskite phases occur at lower temperatures than by solid phase reaction (sol-gel precursor - 500 <T <600 ° C; precursors obtained by coprecipitation and sorption methods - at 600 <T <700 ° C and 700 <T <800 ° C, respectively).  

Keywords: ferroics, LaMnO3, X-ray diffraction, solid-phase synthesis, sol-gel synthesis, sorption, co-precipitation

The existing methods of calculation of the annual change in soil temperature. Identified areas of their application and the possible deviations from reality. The requirements to the boundary conditions of the calculation. Defines the principles of the choice of initial conditions. The preconditions for the development of a universal method of calculation.

Keywords: heat pump, renewable energy, solar radiation, transient mode, soil

In article negative impact of objects of municipal economy on an urban environment, on the example of a site of charging of accumulators of the motor transportation enterprise is considered. The physical model of process of pollution of the air environment is developed for a site of charging of accumulators on ATP. The description is given to basic elements of model (technological raw materials, processing equipment, etc.), participating in air pollution process.

Keywords: the municipal economy polluting substance, process of pollution of the air environment, technological raw materials, processing equipment

Considers the most important sources of material pollution of urban territories. A comprehensive approach to studying properties of pollutants, based on the theory of disperse systems. Built block diagram of systematization of parameters that determine the behavior of contaminants from the position of theory of disperse systems. The dependence between the behavior of pollutant aerosol and parameters of its stability.

Keywords: Contaminant dispersion system, the parameters of pollutant properties, stability of pollutant aerosol

Considered relevant for the construction industry the problem of air pollution by dust. A significant level of airborne dust is typical for plants of concrete products and structures. A physical model of the process of mixing of air pollution department, which includes the main stage of the contamination: education, allocation and distribution of pollutants. Ustanovnleno that the main objects of the physical model are contaminant technological raw materials, manufacturing equipment, the workplace air and the ground layer of the atmosphere.

Keywords: Contaminant technological raw materials, manufacturing equipment, workplace air, the physical model of air pollution

The establishment of automated air monitoring systems is a promising way of the air monitoring devices development. The comparative analysis of literature has shown that thin films based on semiconductor metal oxides are effective and widely used material for air monitoring systems creation. In order to create effective and more sensitive sensors it is important to research processes that occur on the surface of the gas sensitive material when it contacts with different substances. The processes that proceed on the surface of gas sensitive material based on SiO2SnOxCuOy during the interaction with molecules of nitrogen dioxide. Quantum chemical calculations have shown that there are three possible mechanisms of interaction between the molecules of nitrogen dioxide with a surface of gas sensitive material.

Keywords: multitouch system of the monitoring, gas-sensitive material, molecules of dioxide of nitrogen

  The problem of air quality control is relevant at the present time. There are a lot of different devices and methods of air monitoring. The promising devices for air monitoring are automated air monitoring systems functioning in real time regime. The basic part of such system is a chemical gas sensor. Gas sensors can be combined into the arrays or so called multisensory systems to increase their effectiveness. Sensor arrays using semiconductor sensors based on SiO2CuOx, SiO2SnOxCuOy, SnOxZrOy, silver-polyacrylonitrile thin films made at department of chemistry and ecology have been investigated in this work. As a result of sensors signals processing gas recognition technique has been developed. The recognition of ammonia, nitrogen dioxide, chlorine has been made.

Keywords: monitoring, massifs of sensors, semiconductor sensors of gases

  We have investigated electrical and gas sensitive properties of gas sensor based on carbon nanotubes (CNT) and carbon nanotubes modified by metal oxides (such as tin oxide and silicon oxide).  Also we  have find out that modification of  CNT by  metal oxides helps to  improve film`s adhesion to substrate, decrease electrical resistance, recovery time, working temperature , enhance gas sensitivity in comparison with sensitive elements based  only on CNT or metal oxides. Moreover experimental results showed that properties of composite material depend on concentration correlation of solutions. As a result we can get highest sensitivity of sensor element by choosing optimal relation between concentrations of solutions.

Keywords: Сarbon nanotubes, modification, tin oxide, silicon oxide, gas sensor